TNK LAB

Paul Trap: Micromotion from a Stray Electric Field

x'' + γx' + (a − 2q cos 2τ) x = εx
y'' + γy' − (a − 2q cos 2τ) y = εy
τ = Ωt / 2, lengths in units of r₀
q = q₀/f², a = a₀/f², γ = γ₀/f, ε = ε₀/f²
f = Ω/Ω₀ (ε = 0 unless a stray field is on)
Trap parameters
1.00
0.400
0.000
0.050
Stray electric field
0.030
0.000
0 %
Initial ion state
0.50
0.40
0.00
0.10
Display
2.0×
60
Motion:—
βx (secular):—
βy (secular):—
Effective q:—
Effective a:—
Net static field (εx, εy):—
Equilibrium offset (x, y) / r₀:—
Micromotion amplitude (x, y) / r₀:—
Time τ₀ (Ω₀t/2):0.0
Distance from axis |r|/r₀:0.00

Excess micromotion. A static stray field pushes the ion off the trap axis, away from the RF null where the RF field vanishes. The ion settles where the static force balances the time-averaged RF force, but there the RF field is not zero, so the ion is shaken at the RF frequency. This driven motion is called excess micromotion, and its amplitude is about (q/2) times the displacement.

Cooling cannot remove it. Turn on friction and press "Settle onto the equilibrium orbit": the slow secular motion dies away but the ion keeps oscillating at the RF frequency. Raising the compensation slider cancels the stray field with extra electrodes, which brings the ion back to the null and makes the micromotion vanish. This is how experiments null it.

An oscillating quadrupole field cannot trap a charge with a static potential alone (Earnshaw), but the rapidly alternating saddle gives a net force towards the axis, so the ion is confined.

Motion is bounded only when both x and y are stable (green region of the stability diagram). For a = 0 this needs q < 0.908. Inside it the ion makes a slow secular oscillation at ω ≈ βΩ/2 with fast micromotion at Ω.

For fixed voltages, q and a scale as 1/Ω². Raising the RF frequency moves the operating point towards the origin of the stability diagram: the ion is held more weakly, so the secular motion slows and the micromotion shrinks. Lowering it can push the ion out of the stable region.

Friction (for example collisions with a buffer gas) removes energy, so the ion spirals towards the axis. It also enlarges the stable region: points just outside the green area can become bounded.

Ion trajectory (x–y plane)

Rods: red = positive potential, blue = negative. Shaded square: potential energy of a positive ion (red = high, blue = low), tilted by any stray field. Dashed circle: r = r₀. Cross: the equilibrium position; teal line: the micromotion orbit about it (shown only with a stray field on).

Position vs. time

Stability diagram