TNK LAB

Linear Paul Trap in 3D

x'' + (ax − 2q cos 2τ) x = 0
y'' + (ay + 2q cos 2τ) y = 0
z'' + 4κ z = 0
ax = a − 2κ, ay = −a − 2κ
κ = (ωz/Ω)², τ = Ωt/2
(+ friction −γv on every axis if enabled)
Trap parameters
1.00
0.400
0.000
0.100
0.050
Initial ion state
0.40
0.30
1.20
0.00
0.08
0.00
Display
2.0×
80
Motion:—
βx (radial secular):—
βy (radial secular):—
Axial ωz/Ω:—
Effective q:—
Effective ax, ay:—
Time τ₀ (Ω₀t/2):0.0
Distance from axis |r|/r₀:0.00
Axial position z/r₀:0.00

The four RF rods confine the ion radially (x, y) as in sim33. Two ring electrodes at the ends carry a static DC voltage that repels the ion, giving a harmonic well along the axis (z).

A static potential cannot trap in all three directions, so the endcap field that confines z must push the ion outward in x and y. This shifts both radial a-parameters by −2κ, which is why strong axial confinement eats into radial stability (watch the green region move).

The axial motion is a slow, undamped harmonic oscillation (az = 4κ). Friction damps all three axes and the ion settles at the centre of the trap.

Ion in the trap (3D)

Drag to rotate. RF rods are tinted by their instantaneous potential (red = positive, blue = negative); the two end rings carry the static endcap voltage. The dashed ring marks r = r₀ at the ion's axial position.

Position vs. time

Radial stability diagram